Rubber gaskets and seals

Rubber and EPDM Gaskets

• SILICONE GASKETS

• Silicone has excellent stability and flexibility at very low as well as at very high temperatures. It is very resistant to compression, oxygen, solar light, ozone and humidity and it is apt for food and pharma applications.

  • Gaskets cut from sheet.

  • Solid silicone gaskets

  • Standard colours: Translucent, White, black, red and blue.

  • For larger series, any RAL colour can be produced.

  • Hardness: Standard 40º/50º/60º/70º Sh. A.

  • Other hardnesses on request

  • Minimum thickness: 0,3 mm
• Sponge/foam silicone gaskets
  • Standard colours: White, red, black
  • For larger series, any RAL colour can be produced.
  • Densities: 200/250/400/530 Kg/m3

• Gaskets with food, FDA and pharma certification.

   – Gaskets in conductive silicone.

   – High temperature silicone gaskets (+270 ºC).

   – Silicone metal detectable gaskets. (Black or blue).

   – Silicone gaskets for vacuum membranes.

   – Silicone adhesive for bonding the gasket to other materials.

• EPDM Gaskets

  Epdm,gaskets and seals are resistant to outdoor elements in general, ozone, oxidization, UV light, ionized and cosmic radiations.

• Gaskets cut from sheet 

   

• Solid EPDM gaskets and seals

  • Standard colours: Black or white (the latter with FDA approval)

  • Other colours avalable upon request (Quantity dependent)

  • Standard hardnesses: 40º/50º/60º/70º/80 ShA.

  • Special hardnesses: Upon request

  • Minimum thickness: 0,5 mm

• Foam/sponge EPDM gaskets and seals 
  • Standard colours: Black, grey, red, blue, yellow, greeen and white.
  • Standard hardnesses: 10º-15º/20º-25º/30º-35º Sh. A.
  • Density: 110-150 Kg/m3
  • Minimum thickness: 1,5 mm

• NBR  gaskets and seals
• NBR has excellent resistance to transmission fluids, hydrolic fluids, lubricants and other non-polar petroleum based products.
• Gaskets cut from sheet
• Solid NBR:
  • Standard colours: Black or white (the latter with FDA approval)
  • Other colours avalable upon request.
  • Standard hardnesses: 40º/50º/60º/70º/80 ShA.
  • Other hardnesses upon request
  • Minimum thickness: 0,5+0,2 mm

• Foam or sponge NBR
  • Standard colours: Black, grey, red, blue, yellow, greeen and white.
  • Standard hardnesses:10º-15º/20º-25º/30º-35º ShA.
  • Others upon request
  • Minimum thickness: 1,5 mm
• Available types of NBR:
  • Approved FDA.
  • Reinforced with textil mesh
  • High content
  • With adhesive